Editing Inkscape Guide

This page shows how to create the basic elements of a Warlight map using Inkscape. If you are new to Inkscape then it is recommended that you read this!

== Setting Page Properties ==

Before you start drawing your map there a couple of things that need to be done.

To access page properties click 'File' then 'Document Properties'. A small tab should appear.

Firstly the background colour needs to be changed to black. This is necessary for all Warlight Maps. Just click the squared bar labelled 'Background' and change it to black.

Secondly the size of the document can be changed. The options for this are located on the bottom half of the page properties tab.

http://s18.postimg.org/goha70id5/Document_Properties.png

''Please note'' that you can change the page size later on without affecting your drawing. The max size for a Warlight map is 3330x2440. Also you can resize the document to fit the size of your drawing in the page properties tab as well.

== Inserting A Template Image ==

To make a map that is both accurate and looks great you may want to use a template of the place you’re making a map of.

You can upload a image to Inscape from your computer may clicking on 'File' then 'Import'. Double click the image and you’re done.

If a box appears asking to link or embed the image then select 'embed'.

http://s17.postimg.org/5d29ngw73/Image_Upload.png

You can resize the image the standard way, by dragging the corners and arrows presented.

== Creating A Territory ==

This section will show how to create a territory from start to finish.

First you must select the 'Draw Calligraphic Or Brush Strokes' tool from the left side bar, (the one that looks like a ball point pen with 2 white dots below it.)

http://s9.postimg.org/6g50tumu3/Pen.png

This tool will allow you to create straight lines and curves to form shape. Just click to form straight lines, hold to form curves.

Connect the end of the line to the start to create a shape.

If part of your shape is out of place then you do not have to redraw the whole thing! You can use the 'Edit Path By Nodes' tool located at the 2nd from top tool on the left hand side tool bar. Your shape will appear red showing every corner and node in the shape, you can drag the nodes to edit your shape.

http://s17.postimg.org/m8m007raz/Nodes.png

The final step of making a territory is to name it. Select the shape and go to 'Object' then 'Object Properties'. On click a small box will appear. The description, label and title do not affect the territory when uploading to Warlight. It is the Id that you need to change. Replace the text inside the Id box with Territory_ followed by a number. EG: Territory_34

To set the Id once changed click 'Set'.

''Please note'' you can change the colour settings and line thickness of a shape but Warlight will automatically change them to the map standard. To change these settings go to 'Object' then 'Fill And Stroke'.

== Creating A Bonus ==

Bonuses are made in a simular way to territories but it's much easier!

Most bonuses are square shaped, but you can have them any shape you like. If you chose square or circle a preset shape maker tool is located at the top half of the left hand tool bar.

Just create the shape of you bonuse to the size you want. (It can be edited whenever you like.)

Then like a territory go to 'Object' then 'Object Properties' to be greeted with the Object Properties box.

Like a territory the label, title and description do not matter but the Id does. 

The Id needs to be BonusLink_ followed by the bonus name. EG: BonusLink_EastEurope 

Please note when uploading to warlight you can add spaces to the name but the capitals and name must be the same. So BonusLink_EastEurope can be named on Warlight EastEurope or East Europe but not east europe or East europe.

== Inserting Text ==

Some warlight maps contain text, either for titles or to add effect to the map.

To add text just click the 'A' on the left hand tool bar.

http://s8.postimg.org/4xdo8f7i9/Text.png

When you choose where to place your text you can change its font type, size, boldness and italics at the top of your screen.

Like shapes then can be moved and edited at any time.

''Please note'' for text to appear when uploaded to Warlight it must be of a path type. To do this just select the text and go to 'Path' then 'Object To Path'. Job done.

== Unioning (1 Territory That Spans Over Several Shapes) ==

Sometimes a single territory is made up of several shapes! These need to be combined as a territory must be one shape only. Sometimes you can't just redraw them as they might not connect (EG: Nations with islands,) but who wants to redraw them anyway?

You can combine shapes easily by using the Union tool.

Select all shapes you want to combine (use the shift key or drag over all the shapes.) Once selected go to 'Path' then 'Union' and multiple have become one.

''Please note'' is one of the shapes you group has a Id of Territory_ you may get errors when uploading to Warlight.

== Fixing small territories ==

The union feature can also be used to ensure players can click on small territories. Take, for example, Baja from the Earth map. In its raw form, it's way too small to fit an army number or be clickable:

http://s3cdn.warlight.net/static/img/Baja1.png

To rectify this, we draw a circle on top of it:

http://s3cdn.warlight.net/static/img/Baja2.png

Then select both the new circle and the Baja territory behind it at the same time. Select Path -> Union, and observe the resulting territory:

http://s3cdn.warlight.net/static/img/Baja3.png

== Cutting holes  ==

Sometimes maps call for having territories inside of other territories or bonuses within territories, maybe even water. It may be logical to just make both territories and put the outer one behind the inner one, but this doesn't work since in WarLight player-controllable territories should never overlap. Instead, a hole should be cut in the bigger territory so the smaller one can persist in the hole.
 
To accomplish this, we use the Path -> Difference command. To begin, select both territories (the inner and outer one) at the same time using Shift+Click

http://s3cdn.warlight.net/static/img/CutTutorial1.png

Then select Path -> Difference. This will delete the smaller object and leave the outer one with a hole.

http://s3cdn.warlight.net/static/img/CutTutorial2.png

Since this deletes the inner object, you should consider making a duplicate of it, and perform the operation with the duplicate.

== Simplify ==

Sometimes territories can contain way more data than they need. One example is after drawing territories with the pencil tool, if you view the vertices (F2) you'll see it has an excessive amount.
 
This is easy to fix simply by selecting Path -> Simplify (Ctrl+L). This reduces the number of vertices drastically, and in most cases, doesn't alter the appearance of the object at all:

http://s3cdn.warlight.net/static/img/Simplify.png
 
Not only does this make the object easier to work with and increase the performance of Inkscape, it also reduces the size of your resulting WarLight map which makes it load faster and allows you to fit more objects into your map.

== Path Division ==

One way of building WarLight maps is to divide larger areas into smaller territories with the path division operation. It can be used to divide a single region into two according to another path that defines the border between the new regions.
 
To split a region, you naturally first have to have drawn this region as a proper Inkscape path. Begin by drawing the desired border as a new path using, for example, the Pen tool. It does not matter if the path defining the border extends outside the territory you wish to split, as it disappears when this operation is complete.
 
After drawing the new border, select the region with the Selection tool, and then also simultaneously select the dividing path while pressing the Shift key. Then select the Division operation from the Path menu, or press its shortcut Ctrl+/. You now have two regions that you can modify separately, and perhaps split again to make smaller regions. It is a good idea to simplify the dividing path before doing this, as simplifying the two new regions afterwards separately usually changes their border shapes in different ways.
 
When splitting a large continent into bonus regions, you can make use of the Inset operation after making all the divisions. Using an inset of half a pixel (set by going to Inkscape Preferences and opening the Steps tab) on each of the bonus regions should make their borders appear adjacent in the recommended way. After defining all the bonus regions, no further insets are needed, as inside each bonus region the recommended way is to have the borders overlap. Because of this, the bonus regions and their insets should be done first when mapping a larger continent.

== See Also ==

For more imformation on map making, or if you have a question visit the warlight forums, chat or some of these wiki articles!

*[[Map Making]]
*[[Creating The SVG]]
*[[Uploading Your SVG]]
*[[Entering Map Details]]